Map Scales

Map Scales

A map is a hardcopy representation of part of the earth's surface and it is essential that a scalebar and scale ratio be present on the map to inform the user of the reduction factor. This enables users to measure distances on the map and determine the distance on the ground. These days maps are usually produced under the metric system which makes it easy to perform this task. Maps are usually produced at standard scale factors of (say) 1:10,000 or 1:50,000 and all you need to do is take a measurement on the map (in mm) and multiply that figure by the scale factor to determine the distance on the ground.

Example:  Measure  466 mm on a map which is scale 1 : 50,000  ...

466 x 50,000 = 23,300,000 mm
ie  23,300 metres
ie  23.3 kilometres


You may, however, come across an older map from before the mid 1960's when imperial measurements were the norm. These maps displayed scale ratios but often they were of the form  '60 chains to the inch' or '2 miles to the inch' etc 

... so how you measure something on that map and convert it to modern day units? 

Easy ... measure mm on the map and refer to the table below for the scale factor ...

Nominated Scale Ratio

Calculation

Scale Factor

40 Chains to the Inch

40 x 22 x 36

1 : 31,680

60 Chains to the Inch

60 x 22 x 36

1 : 47,520

2 Miles to the Inch

63,360 x 2

1 : 126,720

4 Miles to the Inch

63,360 x 4

1 : 253,440

Example:  Measure 132mm on a map which is scale 60 Chains to the Inch ...

132 x 47,520 = 6272,640 mm
ie 6,272.6 metres
ie 6.27 kilometres